Soft Partition Film

Soft Partition Film (Transparency Type)

Soft Partition Film (Transparency Type)

ACHILLES SEIDEN F

ACHILLES SEIDEN F
ACHILLES SEIDEN F is printed with a grid-like pattern of specially prepared electro-conductive carbon on one side of flame retardant, clear, ACHILLES FLARRE film.
The result is a highly effective and long lasting electro-conductive material with a specific surface resistance of 106ohm.

ACHILLES SEIDEN F (Both Sides Printed)
ACHILLES SEIDEN F (Both Sides Printed) has the special electro-conductive printing on both front and back sides, and is only available in 0.3mm thickness.



Caution:
1. ACHILLES SEIDEN F must be grounded when in use.
2. Do not use solvent-based cleaners on ACHILLES SEIDEN F products. Solvents will damage the special conductive printed grid.

ACHILLES SEIDEN CRYSTAL

ACHILLES SEIDEN CRYSTAL
ACHILLES SEIDEN CRYSTAL is a specially formulated anti-static PVC film with good transparency as well as flame retardancy. Because the anti-static effect is acquired by formulation, both sides of the film display the same excellent results. This product is available in thickness ranging from 0.1mm to 3.0mm.



Caution:
Clarity of ACHILLES SEIDEN CRYSTAL may degrade due to aging, depending on eonvironmental conditions. To maintain anti-static properties, monitor and replace this product as needed.

Standard Sizes

Product NameSEIDEN FSEIDEN CRYSTAL
PrintOne sideBoth
Side		No Print
ColorClear
Thickness [mm]0.1 0.3 0.5 0.3 0.1 0.3 0.5 1.0 2.0 3.0
Width [cm]137183137/183137137137120
Length [M]50302030503020101010

Contact

Page Top